Model H is Heatex’ most versatile cross flow plate heat exchanger.
Very large plate distances available
Widest set of options available
A single pass exchanger can provide a sensible efficiency of 65 – 70%
Model H is Heatex’ original cross flow plate heat exchanger with typical dry temperature efficiency up to 65% for a single pass and 85% for two-step arrangements.
Model H offers the widest set of options and configurations among our cross flow plate heat exchangers.
Model H’s performance is certified according to Eurovent, AHRI and TüvSüd. It can be configured to comply with Ecodesign 1253/2014 requirements.
All Heatex cross flow plate heat exchangers meet several hygiene requirements.
All available sizes and options:
*Thermal Management applications only.
Engineering Specifications
Performance - Eurovent
Performance - AHRI
Performance - TüvSüd
Hygiene
Product Catalog
Model H has the widest set of options among our cross-flow heat exchangers.
For improved corrosion protection in demanding applications such as in coastal environments, all Heatex aluminum heat exchangers are available with epoxy coated plates.
For the highest corrosion protection, we recommend to add both a painted framework and laquered plate edges.
For corrosion protection in wet and humid applications, all Heatex exchangers are available with powder coated framework and sealed joints.
For the highest corrosion protection, we recommend adding both epoxy coated plates and laquered plate edges.
For ultimate corrosion protection, we recommend laquered plate edges which means that lacquer is run along the joints of the plates, covering the cutting edges found on epoxy coated plates. This will also improve the already high tightness of the exchanger and limit leakage to a minimum.
Suitable for close/open bypass exchanger section in connection with a cross-flow plate heat exchanger.
Model CS is a casing for Heatex cross-flow heat exchanger Models H and H2.
Well-proven plate design creates turbulence even at lower velocities which, combined with high channel heights, results in a low-pressure drop and a total increase in efficiency.
All units are produced at our global production facilities with our proprietary production equipment according to the same standardized processes, ensuring uniform product quality and favorable lead times worldwide.
All Heatex rotary heat exchangers share the same high-efficiency matrix and a wide variety of well-heights to suit various performance requirements.
Heatex air-to-air heat exchangers are designed to comply with all national and local building codes.
We hold several certifications for product and operation quality worldwide, including Eurovent, AHRI, EAC, RLT-Hygiene and ISO 9001.
Our products are field tested and have proven to deliver a fast ROI.
Model H is commonly used in the following applications.
We are here to support you.
