Model H2 Cross Flow Air-to-Air Heat Exchanger

PRODUCT INFORMATION

Overview

Model H2 is our most efficient cross flow plate heat exchanger. It combines low-weight with high differential pressure resistance and is able to reach typical dry temperature efficiencies above 80%.

The efficiency is improved by its slim profiles and our latest patented plate design, creating high turbulence even at lower velocities while keeping pressure drop low.

Model H2’s performance is certified according to Eurovent, AHRI and TüvSüd. It can be configured to comply with Ecodesign 1253/2014 requirements.

All Heatex cross flow plate heat exchangers meet several
hygiene requirements.

Technical Data

All available sizes and options listed.

Combined module size	600 – 3000 mm (19.69″ – 118.11″)
Plate size	500 / 600 / 700 / 750 / 850 / 1000 / 1200 mm (19.69″ / 23.62″ / 27.56″ / 29.53″ / 33.45″ / 39.37″)
Plate material	Aluminum Epoxy
End plates	Aluzinc (plate size > 600 mm (23.62″)) Aluminum (plate size < 300 mm (11.81″))
Corner profiles	90° Aluminum 45° Aluminum (not available on H2 1200)
Maximum allowed temperature and sealing	90°C (190° F) – Silicone-free 200°C (390° F) – Silicone 240°C (464° F) – Silicone
Max. leakage (in %)	0.1% of nominal airflow with non-silicone at 400 Pa (1.6″ WC) differential pressure. 1% of nominal airflow for all models with silicone sealant
Max. allowed differential pressure	1800 – 3000 Pa (7.23″ WC – 12″ WC), depending on plate spacing > 3000 Pa (12″ WC) for plate spacing above 4 mm (0.16″) For H2 1200/2400: 1500 – 1700 Pa (6″ WC – 7.23″ WC) for plate spacing 2.0 mm – 3.0 mm (0.08″ – 0.12″) > 3000 Pa (12″ WC) for plate spacing above 4 mm (0.16″)

Documents

Technical Documentation

Engineering Specifications
EN
Options
EN

Conformity

Performance - Eurovent
EN
Performance - AHRI
EN
Performance - TüvSüd
EN
Hygiene
EN

Marketing Material

Product Catalog
EN (Metric), EN (Imperial)

OPTIONS

We offer a wide range of options to suit various application and performance requirements.

Corrosion Protection

Epoxy Coating

For improved corrosion protection in demanding applications such as in coastal environments, all Heatex aluminum heat exchangers are available with epoxy coated plates. For the highest corrosion protection, we recommend to add both Painted Framework and Closed Plate Cutting Edges.

Corrosion Protection

Painted Framework

For corrosion protection in wet and humid applications, all Heatex exchangers are available with powder coated framework and sealed joints.

For the highest corrosion protection, we recommend adding both Epoxy Coated Plates and Closed Plate Cutting Edges.

Corrosion Protection

Closed Plate Cutting Edges

For ultimate corrosion protection, we recommend Closed Plate Cutting Edges which means that lacquer is run along the joints of the plates, covering the cutting edges found on epoxy coated plates. This will also improve the already high tightness of the exchanger and limit leakage to a minimum.

ACCESSORIES

Dampers

Suitable for close/open bypass exchanger section in connection with a cross-flow plate heat exchanger.

Model CS

Model CS is a casing for Heatex cross-flow heat exchanger Models H and H2.

High Efficiency

Efficiency is improved by a unique and optimized plate design, creating turbulence even at lower velocities.

All units are produced at our global production facilities with our proprietary production equipment according to the same standardized processes, ensuring uniform product quality and favorable lead times worldwide

Heatex plate heat exchangers are tested and approved

Conformity

Heatex air-to-air heat exchangers are designed to comply with all national and local building codes.

We hold several certifications for product and operation quality worldwide, including Eurovent, AHRI, EAC, RLT-Hygiene and ISO 9001.

Our products are field-tested and have proven to deliver a fast ROI.

Technical Expertise

With a global team of sales and technical support, Heatex responds quickly to inquires. We have the technical expertise to customize solutions for your unique needs.

Our products always comply with standards, perform according to (or even exceed) codes and specifications, and always live up to the highest technical standards.

Model H2

Superior Efficiency

Compact

Low Pressure Drop

Superior Efficiency

Compact

Low Pressure Drop

PRODUCT INFORMATION

OPTIONS

Epoxy Coating

Painted Framework

Closed Plate Cutting Edges

ACCESSORIES

Dampers

Model CS

High Efficiency

Conformity

Technical Expertise

APPLICATIONS

Commercial Ventilation

Industrial Ventilation

Data Center Cooling

Retrofitting

CONTACT US