Calculate with Heatex Select
Search Search Search
Heatex Model P
Heatex cross flow airflow configuration
Heatex crossflow airflow configuration
Heatex cross flow airflow configuration
Heatex cross flow airflow configuration
Heatex Model P
Heatex cross flow airflow configuration
Heatex crossflow airflow configuration
Heatex cross flow airflow configuration
Heatex cross flow airflow configuration
Cross Flow

Model P

Model P is a heavy duty, cross flow plate heat exchanger, specially designed for applications where high differential pressures occur.

Calculate with Heatex Select
Heavy Duty
Heavy Duty

Very high differential pressure resistance

Low Pressure Drop
Low Pressure Drop

Very large plate distances available

High Efficiency
High Efficiency

A single pass exchanger can provide a sensible efficiency of 65 – 70%

Sizes
Sizes

600 – 3000 mm (24″ – 118″)

Heavy Duty
Heavy Duty

Very high differential pressure resistance

Low Pressure Drop
Low Pressure Drop

Very large plate distances available

High Efficiency
High Efficiency

A single pass exchanger can provide a sensible efficiency of 65 – 70%

Sizes
Sizes

600 – 3000 mm (24″ – 118″)

PRODUCT INFORMATION

Overview

Model P is a heavy duty, cross flow plate heat exchanger, specially designed for applications where high differential pressures occur. Efficiencies up to 65% for single units and up to 85% for two-step arrangements are typical.

Based on the same well-proven plate design as Model H, Model P’s efficiency is similar but offers a higher differential pressure resistance due to its extra strong aluminum plates.

A wide range of options including painted framework, epoxy coated plates and closed plate cutting edges will improve corrosion resistance and minimize air leakage even further. Custom made accessories like bypass and dampers are available for all our cross-flow heat exchangers.

Model P is our most robust aluminum cross flow plate heat exchanger.

Model P’s performance is certified according to Eurovent and TüvSüd. It can easily be configured to comply with Ecodesign 1253/2014 requirements.

All Heatex cross flow plate heat exchangers meet several hygiene requirements.

Technical Data

All sizes and options listed.

Combined module size
  • 600 – 3000 mm
    (23.62″ – 118.11″)
Plate size
  • 600 / 750 / 850 / 1000 mm
    (23.62″ / 29.53″ / 33.45″ / 39.37″)
Plate material
  • Aluminum
  • Epoxy
End plates
  • Aluzinc >600 mm
  • Aluminum <300 mm
Corner profiles
  • 90° Aluminum
  • 45° Aluminum
  • Aluminum brush
  • 90° Aluminum slotted
Maximum allowed temperature and sealing
  •  90°C (190° F) – Silicone-free
  • 200°C (390° F) – Silicone
  • 240°C (464° F) – Silicone
Max. leakage (in %)
  • 0.1% of nominal airflow for size > 425 mm (16.73″ WC)
  • 1% of nominal airflow for sizes < 425 mm (16.73″ WC)
  • 1% of nominal airflow for all models with silicone sealant
Max. allowed differential pressure
  • <3800 Pa (15″ WC)
Documents
Technical Documentation

OPTIONS

We offer a wide range of options to suit various application and performance requirements.

Epoxy plates
Corrosion Protection
Epoxy Coated Plates

For improved corrosion protection in demanding applications such as in coastal environments, all Heatex aluminum heat exchangers are available with epoxy coated plates.

For the highest corrosion protection, we recommend to add both Painted Framework and Closed Plate Cutting Edges.

Painted framework
Corrosion Protection
Painted Framework

For corrosion protection in wet and humid applications, all Heatex exchangers are available with powder coated framework and sealed joints.

For the highest corrosion protection, we recommend adding both Epoxy Coated Plates and Closed Plate Cutting Edges.

Image coming soon
Corrosion Protection
Closed Plate Cutting Edges

For ultimate corrosion protection, we recommend Closed Plate Cutting Edges which means that lacquer is run along the joints of the plates, covering the cutting edges found on epoxy coated plates. This will also improve the already high tightness of the exchanger and limit leakage to a minimum.

View more

Accessories

Heatex Damper
Dampers

Suitable for close/open bypass exchanger section in connection with a cross-flow plate heat exchanger.

Heatex Model H Plate
High Efficiency

Well-proven plate design creates turbulence even at lower velocities which, combined with high channel heights, results in a low-pressure drop and a total increase in efficiency.

All units are produced at our global production facilities with our proprietary production equipment according to the same standardized processes, ensuring uniform product quality and favorable lead times worldwide.

Heatex plate heat exchangers are tested and approved
Conformity

Heatex air-to-air heat exchangers are designed to comply with all national and local building codes.

We hold several certifications for product and operation quality worldwide, including Eurovent, AHRI, EAC, RLT-Hygiene and ISO 9001.

Our products are field tested and have proven to deliver a fast ROI.

Computer and men in the office
Technical Expertise

With a global team of sales and technical support, Heatex responds quickly to inquires. We have the technical expertise to customize solutions for your unique needs.

Our products always comply with standards, perform according to (or even exceed) codes and specifications, and always live up to the highest technical standards.

APPLICATIONS

Model E is commonly used in the following applications.

Industry
Industrial Ventilation

CONTACT US

Get in touch! We are always here to help you!

Contact us